Instructions for software updates on the Truma iNet X (Pro) Panel

You always want to be up-to-date? We recommend installing the latest available software version of the iNet X (Pro) panel. This is the only way to benefit from continuous system optimizations and to use new features. 

Requirement for panel updates: iNet X App on mobile device

Software updates can only be performed using the Truma iNet X App on a mobile device and bluetooth. An Internet connection is required for this. If an update is available for your panel, a corresponding message will be displayed in the app. 

Step-by-step instructions for installing software updates on the iNet X Panel

  1. If you haven’t already done so, install the free Truma iNet X app on your mobile device. You can see how this works further down in this article.  
  2. Connect your mobile device to the Truma iNet X via Bluetooth. The mobile device must remain within Bluetooth range of the Truma iNet X panel during the entire update process. 
  3. Before you start the update process, check if the mobile device has enough battery power. If necessary, connect it to an appropriate power supply.  
  4. To start the update, follow the instructions in the app and on the panel.  
  5. The update runs in the background and can take up to 15 minutes. During the update process, you can use your panel as usual.  
  6. When the update has been completed successfully, a corresponding message will be displayed on your panel. 
  1. The panel will reboot automatically after the update. 
  2. Done. Now you are up to date again. 

You can check the status of the software update or which software version is currently installed on your panel at any time in the device manager on your panel. 

If the update was not successful, then the last installed software will be used to ensure safe operation of the control panel. 

How to connect a mobile device to your iNet X Panel

The connection from the mobile device to the panel is established via Bluetooth. Therefore, the mobile device must be within range of the panel. 

You can establish a connection in just a few clicks: 

  1. Activate Bluetooth on the mobile device. If you have any questions about the settings of the mobile device, please contact the supplier.  
  2. To connect the app to the panel for the first time, open it on your mobile device and click the “iNet X App” tile on the panel display.  
  3. Follow the instructions of the setup wizard on the panel display and the instructions of the app on the mobile device. 

Video instructions for the Truma iNet X (Pro) Panel

The Truma iNet X (Pro) Panel* is the central control panel of the iNet X open system solution. Indeed, the panel forms the basis, allowing you to benefit from all the smart functions of the iNet X System, making your camper van smarter step by step.

Operation in simple steps: You’ll discover how to use your panel correctly in the following videos.

User interface and layout of the Truma iNet X Panel menu

In this video, you’ll discover:

  • How to operate the touch display
  • How to unlock your panel
  • How the main menu is laid out
  • How to access the settings
  • Where to find details on your appliance’s status, for example, to check the inside temperature
  • How to activate standby mode
  • How to navigate through the menu

Controlling your indoor climate with the Truma iNet X Panel

In this video, you’ll discover:

  • Which buttons are available in the panel for your indoor climate
  • How to switch automatic climate control on and off and control it
  • How to know if your room is being cooled or heated
  • How to access the choice of energy (gas or electric) (Note: The prerequisite here is that a Truma Combi is installed as an E version)
  • How to activate extra fast heating if you need a swift boost
  • How to adjust the fan speed
  • How to switch the system to the quietest mode
  • How to switch the fans on and off

Controlling hot water with the Truma iNet X Panel

In this video, you’ll discover:

  • How you start hot water mode
  • How to set three target temperatures and which target temperature is suitable for which use
  • How to access the choice of energy (gas or electric) (Note: The prerequisite here is that a Truma Combi is installed as an E version)
  • Which panel function allows you to heat water extra quickly

Understanding messages from the iNet X Panel and responding appropriately

In this video, you’ll discover:

  • How the menu for warning and error messages is laid out
  • How to correctly proceed with error messages
  • Where information on possible software updates is displayed
  • How to reset error messages

Any questions? Please share these in the comments area.

*There are two panels which are compatible with the iNet X System:

  • the Truma iNet X Panel (for retrofit) and
  • the Truma iNet X Pro Panel (is only installed ex works in new vehicles by the vehicle manufacturer).

Regardless of whether you have a Truma iNet X Panel or a Truma iNet X Pro Panel installed in your caravan: both offer the same user interface and are the central control panel of the Truma iNet X System.

Further information can be found on our website